Bản mẫu:Hộp thông tin đập/doc

Cách sử dụng

Sử dụng hộp thông tin sau đây cho tất cả các loại nhà máy điện thủy điện liên quan đến đập. Đối với tất cả các loại tích năng, sóng và nhà máy điện thủy triều, xin vui lòng sử dụng {{Infobox power station}}.

{{{name}}}
{{{image_caption}}}
{{{location_map_caption}}}
Tên chính thức	{{{name_official}}}
Quốc gia	{{{country}}}
Vị trí	{{{location}}}
Tọa độ	0°B 0°Đ / 0; 0
Mục đích	{{{purpose}}}
Tình trạng	{{{status}}}
Khởi công	{{{construction_began}}}
Khánh thành	{{{opening}}}
Ngày phá bỏ	{{{demolished}}}
Chi phí xây dựng	{{{cost}}}
Chủ sở hữu	{{{owner}}}
Điều hành	{{{operator}}}
Đập và đập tràn
Loại đập	{{{dam_type}}}
Ngăn	{{{dam_crosses}}}
Chiều cao (móng)	{{{dam_height_foundation}}}
Chiều cao (thalweg)	{{{dam_height_thalweg}}}
Chiều dài	{{{dam_length}}}
Độ cao ở đỉnh	{{{dam_elevation_crest}}}
Chiều rộng (đỉnh)	{{{dam_width_crest}}}
Chiều rộng (đáy)	{{{dam_width_base}}}
Dung tích đập	{{{dam_volume}}}
Đập tràn	{{{spillway_count}}}
Loại đập tràn	{{{spillway_type}}}
Dung tích đập tràn	{{{spillway_capacity}}}
Hồ chứa
Tạo thành	{{{res_name}}}
Tổng dung tích	{{{res_capacity_total}}}
Năng lực hoạt động	{{{res_capacity_active}}}
Năng lực không hoạt động	{{{res_capacity_inactive}}}
Diện tích lưu vực	{{{res_catchment}}}
Diện tích bề mặt	{{{res_surface}}}
Chiều dài tối đa	{{{res_max_length}}}
Chiều rộng tối đa	{{{res_max_width}}}
Độ sâu nước tối đa	{{{res_max_depth}}}
Độ cao bình thường	{{{res_elevation}}}
Thủy triều	{{{res_tidal_range}}}
Trạm năng lượng
Tên	{{{plant_name}}}
Tọa độ	1°1′1″B 1°1′1″Đ
Nhà điều hành	{{{plant_operator}}}
Ngày chạy thử	{{{plant_commission}}}
Ngày ngừng chạy	{{{plant_decommission}}}
Loại	{{{plant_type}}}
Đầu thủy lực	{{{plant_hydraulic_head}}}
Tua bin	{{{plant_turbines}}}
Công suất lắp đặt	{{{plant_capacity}}}
Hệ số công suất	{{{plant_capacity_factor}}}
Phát điện hàng năm	{{{plant_annual_gen}}}
Trang web {{{website}}}
{{{extra}}}

{{Hộp thông tin đập
| name                 = 
| name_official        = 
| image                = 
| image_size           = 
| image_caption        = 
| image_alt            = 
| location_map         = 
| location_map_size    = 
| location_map_caption = 
| location_map_alt     = 
| coordinates          = <!-- {{tọa độ|..|..|type:landmark|display=inline,title}}-->
| country              = 
| location             = 
| purpose              = 
| status               = 
| construction_began   = 
| opening              = 
| demolished           = 
| cost                 = 
| owner                = 
| operator             = 
| dam_type             = 
| dam_crosses          = 
| dam_height_foundation= 
| dam_height_thalweg   = 
| dam_length           = 
| dam_elevation_crest  = 
| dam_width_crest      = 
| dam_width_base       = 
| dam_volume           = 
| spillway_count       = 
| spillway_type        = 
| spillway_capacity    = 
| res_name             = 
| res_capacity_total   = 
| res_capacity_active  = 
| res_capacity_inactive= 
| res_catchment        = 
| res_surface          = 
| res_max_length       = 
| res_max_width        = 
| res_max_depth        = 
| res_elevation        = 
| res_tidal_range      = 
| plant_name           = 
| plant_coordinates    = 
| plant_operator       = 
| plant_commission     = 
| plant_decommission   = 
| plant_type           = 
| plant_hydraulic_head = 
| plant_turbines       = 
| plant_capacity       = 
| plant_capacity_factor= 
| plant_annual_gen     = 
| website              = 
| extra                = 
}}

Các tên tham số và mô tả

Tên tham số	Mô tả
name	Name of dam.
name_official	Official name, if different from name. Preferably in native language.
image	Image filename, without Tập tin: parameter. Animated (.gif) and media files (.ogv) are also allowed.
image_size	Value to overrides the default 250px.
image_caption	Caption beneath image.
image_alt	Alternative text for image.
location_map	Name of a location map file. The coordinates must be specified as well (see below).
location_map_size	Value to overrides the default 250px.
location_map_caption	Caption beneath location map.
location_map_alt	Alternative text for location map.
coordinates	Geographic coordinates using {{tọa độ}}. See here for more details. Remember to avoid being overly precise.
country	Country where the facility is located. Do not use flag icons.
location	General area where located. Avoid being overly-detailed.
purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power.
status	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.
construction_began	Date construction began, consider using {{Start date}}.
opening	Date, or future date, of inauguration. Consider using {{Start date}}.
demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.
cost	Total cost of development.
owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.
DAM AND SPILLWAYS
dam_type	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.
dam_crosses	Body of river or stream below dam
dam_height	Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
dam_height_foundation	Height over foundation bed, with metric conversions.
dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.
dam_length	Length of dam crown, with metric conversions.
dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.
dam_width_crest	Width at crest of dam, with metric conversions.
dam_width_base	Width at base of dam, with metric conversions.
dam_volume	Volume of material in the dam structure.
spillway_count	Number of spillways.
spillway_type	Type of spillway.
spillway_capacity	Capacity of spillway.
RESERVOIR
res_name	Name of upstream body of water, if different than "dam_crosses".
res_capacity_total	Capacity of reservoir, i.e. megalitres.
res_capacity_active	The active, live or useful capacity (storage) of the reservoir.
res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.
res_catchment	Area of catchment for reservoir.
res_surface	Surface area (top water level) of reservoir.
res_max_length	Length of the reservoir at normal levels, with metric conversions.
res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.
res_max_depth	Maximum water depth of reservoir.
res_elevation	The reservoir's height above sea level at normal levels, ith metric conversions.
res_tidal_range	Tidal range, if applicable.
POWER STATION
plant_name	Name of plant, if applicable.
plant_operator	Operator(s) of the hydroelectric power plant.
plant_coordinates	Geographic coordinates of the power station using {{tọa độ}}. See here for more details. Remember to avoid being overly precise.
plant_commission	Power plant commissioning date. May be different than dam opening date.
plant_decommission	Power plant decommissioning date. May be different than dam closing date.
plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.
plant_hydraulic_head	Hydraulic head at power station.
plant_turbines	Number of turbines, with respective rated capacity.
plant_capacity	Current gross installed capacity in megawatts, or planned capacity for those under development. For those which are operational, but with additional under development, please add only the current installed value.
plant_capacity_factor	Capacity factor of the power station, in percentage.
plant_annual_gen	Average annual gross power generation. For a single-year value, adding the year in brackets is encouraged.
website	Raw wikitext for entering website(s). Use [brackets] where appropriate
extras	Free form, spans both columns. Use sparingly.

Tọa độ

The coordinates should be specified using coordinates – with a {{tọa độ}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}}.

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes; nor collapse nested elements which use them.

When giving coordinates, please don't be overly precise.

Dữ liệu bản mẫu

Nhấp vào liên kết [hiện] ở bên phải để hiển thị Dữ liệu bản mẫu.

Đây là tài liệu Dữ liệu bản mẫu cho bản mẫu này được sử dụng bởi Trình soạn thảo trực quan và các công cụ khác; xem báo cáo sử dụng tham số hàng tháng cho bản mẫu này.

Dữ liệu bản mẫu cho Hộp thông tin đập

Infobox for a dam

Tham số bản mẫu

Nên dùng bản mẫu này với các tham số đặt thành khối.

Tham số		Miêu tả	Kiểu	Trạng thái
Name	name	Name of dam	Chuỗi dài	tùy chọn
Official name	name_official	Official name, if different from name. Preferably in native language.	Chuỗi dài	tùy chọn
Image caption	image_caption	Caption beneath image.	Chuỗi dài	tùy chọn
Image alternative text	image_alt	Alternative text for image.	Chuỗi dài	tùy chọn
Location map caption	location_map_caption	Caption beneath location map.	Chuỗi dài	tùy chọn
Location map alternative text	location_map_alt	Alternative text for location map.	Chuỗi dài	tùy chọn
coordinates	coordinates	Geographic coordinates using the coord template	Chuỗi dài	tùy chọn
Country	country	Country where the facility is located. Do not use flag icons.	Chuỗi dài	tùy chọn
Location	location	General area where located. Avoid being overly-detailed.	Chuỗi dài	tùy chọn
Purpose	purpose	Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power.	Chuỗi dài	tùy chọn
Status	status	Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction.	Chuỗi dài	tùy chọn
Construction began	construction_began	Date construction began, consider using {{Start date}}.	Chuỗi dài	tùy chọn
Opening date	opening	Date, or future date, of inauguration. Consider using {{Start date}}.	Chuỗi dài	tùy chọn
Demolished date	demolished	Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}.	Chuỗi dài	tùy chọn
Cost	cost	Total cost of development.	Chuỗi dài	tùy chọn
Owner	owner	Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Ví dụ Owner1: 60%<br/>Owner2: 40%	Chuỗi dài	tùy chọn
Operator	operator	Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam.	Chuỗi dài	tùy chọn
Dam type	dam_type	Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam.	Chuỗi dài	tùy chọn
Dam crosses	dam_crosses	Body of river or stream below dam	Chuỗi dài	tùy chọn
Dam height over foundation	dam_height_foundation	Height over foundation bed, with metric conversions.	Chuỗi dài	tùy chọn
Dam height over thalweg	dam_height_thalweg	Height over thalweg (riverbed), with metric conversions.	Chuỗi dài	tùy chọn
Dam length	dam_length	Length of dam crown, with metric conversions.	Chuỗi dài	tùy chọn
Dam elevation crest	dam_elevation_crest	Height of the dam's crest above sea level, with metric conversions.	Chuỗi dài	tùy chọn
Dam width crest	dam_width_crest	Width at crest of dam, with metric conversions.	Chuỗi dài	tùy chọn
Dam width at base	dam_width_base	Width at base of dam, with metric conversions.	Chuỗi dài	tùy chọn
Dam volume	dam_volume	Volume of material in the dam structure.	Chuỗi dài	tùy chọn
Spillway count	spillway_count	Number of spillways.	Số	tùy chọn
Spillway type	spillway_type	Type of spillway.	Chuỗi dài	tùy chọn
Spillway capacity	spillway_capacity	Capacity of spillway.	Chuỗi dài	tùy chọn
Reservoir name	res_name	Name of upstream body of water, if different than "dam_crosses".	Chuỗi dài	tùy chọn
Reservoir capacity	res_capacity_total	Capacity of reservoir, i.e. megalitres.	Chuỗi dài	tùy chọn
Reservoir active capacity	res_capacity_active	The active, live or useful capacity (storage) of the reservoir.	Chuỗi dài	tùy chọn
Reservoir inactive capacity	res_capacity_inactive	The inactive or dead capacity (storage) of the reservoir.	Chuỗi dài	tùy chọn
Reservoir catchment area	res_catchment	Area of catchment for reservoir.	Chuỗi dài	tùy chọn
Reservoir surface area	res_surface	Surface area (top water level) of reservoir.	Chuỗi dài	tùy chọn
Reservoir maximum length	res_max_length	Length of the reservoir at normal levels, with metric conversions.	Chuỗi dài	tùy chọn
Reservoir maximum width	res_max_width	Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions.	Chuỗi dài	tùy chọn
Reservoir maximum depth	res_max_depth	Maximum water depth of reservoir.	Chuỗi dài	tùy chọn
Reservoir elevation	res_elevation	The reservoir's height above sea level at normal levels, ith metric conversions.	Chuỗi dài	tùy chọn
Reservoir tidal range	res_tidal_range	Tidal range, if applicable.	Chuỗi dài	tùy chọn
Plant name	plant_name	Name of plant, if applicable.	Chuỗi dài	tùy chọn
Plant operator	plant_operator	Operator(s) of the hydroelectric power plant.	Chuỗi dài	tùy chọn
Plant coordinates	plant coordinates	Geographic coordinates of the power station using the coord template	Chuỗi dài	tùy chọn
Plant commissioning date	plant_commission	Power plant commissioning date. May be different than dam opening date.	Chuỗi dài	tùy chọn
Plant decommissioning date	plant_decommission	Power plant decommissioning date. May be different than dam closing date.	Chuỗi dài	tùy chọn
Plant type	plant_type	Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage.	Chuỗi dài	tùy chọn
Plant hydraulic head	plant_hydraulic_head	Hydraulic head at power station.	Chuỗi dài	tùy chọn
Plant turbine count/capacity	plant_turbines	Number of turbines, with respective rated capacity.	Chuỗi dài	tùy chọn
Plant generation capacity	plant_capacity	Installed generation capacity, measured in megawatts (MW).	Chuỗi dài	tùy chọn
Plant capacity factor	plant_capacity_factor	Capacity factor of the power station, in percentage.	Chuỗi dài	tùy chọn
Plant annual power generation	plant_annual_gen	Average annual power generation of the previous year. Measured in gigawatt-hours (GWh)	Chuỗi dài	tùy chọn
Website	website	Raw wikitext for entering website(s). Use [brackets] where appropriate	Nội dung	tùy chọn
Extra data	extra	Free form, spans both columns. Use sparingly.	Chuỗi dài	tùy chọn

Thể loại theo dõi

• Thể loại:Trang sử dụng hộp thông tin đập có tham số không rõ (4)