Bản mẫu:Thông tin căn cứ quân sự
(Đổi hướng từ Bản mẫu:Hộp thông tin căn cứ quân sự)
 | Bản mẫu này sử dụng Lua: |
Cách sử dụng
| Căn cứ không quân Loring | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Căn cứ không quân Limestone | |||||||||
| Limestone và Caswell, Maine ở Hoa Kỳ | |||||||||
 USGS 1970 Aerial Photo | |||||||||
 Logo của bộ chỉ huy chiến đấu không quân | |||||||||
  Loring AFB (KLIZ) Vị trí của Loring AFB | |||||||||
| Tọa độ | 46°56′59″B 67°53′20″T / 46,94972°B 67,88889°T | ||||||||
| Loại | Căn cứ không quân | ||||||||
| Diện tích | 9.000 mẫu Anh (3.600 ha; 14 dặm vuông Anh) | ||||||||
| Thông tin địa điểm | |||||||||
| Sở hữu | Không quân Hoa Kỳ | ||||||||
| Người điều khiển | 42nd Bomb Wing | ||||||||
| Kiểm soát bởi |  Không quân Hoa Kỳ | ||||||||
| Mở cửa cho công chúng | Yes | ||||||||
| Stations | Caribou Air Force Station (Đông Loring), Caswell Air Force Station | ||||||||
| Lịch sử địa điểm | |||||||||
| Xây dựng | 1947–1953 | ||||||||
| Xây dựng bởi | United States Army Corps of Engineers | ||||||||
| Sử dụng | 1950–1994 | ||||||||
| Số phận | Mainly intact, partial demolition | ||||||||
| Sự kiện | Cold War | ||||||||
| Thông tin đơn vị đồn trú | |||||||||
| Chỉ huy hiện tại | Robert J. Pavelko | ||||||||
| Đơn vị đồn trú | 42nd Bomb Wing | ||||||||
| Chủ sở hữu | 69th Bombardment Squadron, 70th Bombardment Squadron, 75th Bombardment Squadron, 42d Air Refueling Squadron, 407th Air Refueling Squadron, 2192nd Communications Squadron, 101st Fighter Squadron | ||||||||
| Thông tin sân bay | |||||||||
| Định danh | IATA: KLIZ, ICAO: LIZ | ||||||||
| Độ cao | 746 foot (227 m) AMSL | ||||||||
| |||||||||
A military installation infobox may be used to summarize information about a military structure or facility, such as a fortification or military base.
The infobox should be added using the {{hộp thông tin căn cứ quân sự}} template, as shown below:
{{Hộp thông tin căn cứ quân sự
| name =
| ensign =
| native_name =
| partof = <!-- for elements within a larger site -->
| location =
| nearest_town = <!-- used in military test site infobox -->
| country =
| image =
| alt =
| caption =
| image2 = <!--secondary image, major command emblems for airfields -->
| alt2 =
| caption2 =
| type =
| coordinates = <!-- {{Tọa độ}} -->
| gridref =
| image_map =
| image_mapsize =
| image_map_alt =
| image_map_caption =
| pushpin_map =
| pushpin_mapsize =
| pushpin_map_alt =
| pushpin_map_caption =
| pushpin_relief =
| pushpin_image =
| pushpin_label =
| pushpin_label_position =
| pushpin_mark =
| pushpin_marksize =
| ownership = <!-- government department such as the MoD or the United States DoD -->
| operator = <!-- where different from ownership such as the RAF or the USAF -->
| controlledby = <!-- such as RAF Bomber Command or the Eighth Air Force -->
| open_to_public = <!-- for out of use sites/sites with museums etc -->
| site_other_label = <!-- for renaming "Other facilities" in infobox -->
| site_other = <!-- for other sorts of facilities - radar types etc -->
| site_area = <!-- area of site m2, km2 square mile etc -->
| code = <!--facility/installation code, applies to US -->
| built = <!-- {{Start date|YYYY}} -->
| used = <!--{{End date|1946}} -->
| builder =
| materials =
| height = <!-- height of tallest part, not above sea level -->
| length = <!-- for border fences or other DMZs -->
| fate = <!--changed from demolished parameter-->
| condition =
| battles =
| events =
| current_commander = <!-- current commander -->
| past_commanders = <!-- past notable commander(s) -->
| garrison = <!-- such as the 25th Bombardment Group -->
| occupants = <!-- squadrons only -->
| website =
| footnotes = <!-- catchall in case it's needed to preserve something in infobox that doesn't work in new code -->
}}
The following supplemental blocks may be copied into the template above as needed, just prior to the "footnotes" parameter.
- Kiểm tra các trang web
<!-- begin test site information --> | subcritical_tests = | nuclear_tests = | thermonuclear_tests = | other_tests_label = <!-- changed from "Other tests" to wording of your choice --> | other_tests = | remediation = | image3 = | alt3 = | caption3 = <!-- end test site information -->
- Sân bay
<!-- begin airfield information -->
| IATA =
| ICAO =
| FAA =
| TC =
| LID =
| GPS =
| WMO =
| elevation = <!-- {{Convert| |m|0}} -->
| r1-number =
| r1-length = <!-- {{Convert| |m|0}} -->
| r1-surface =
| h1-number =
| h1-length = <!-- {{Convert| |m|0}} -->
| h1-surface =
| airfield_other_label = <!-- for renaming "Other facilities" in infobox -->
| airfield_other = <!-- for other sorts of airfield facilities -->
<!-- end airfield information -->
Các tham số
[sửa mã nguồn]Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". If a parameter is not applicable, leave it blank and it will not be displayed. All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).
- name – the name of the installation or structure.
- ensign – optional – a small ensign image used by the installation.
- native_name – optional – the name of the installation in the language(s) of the country which built it, or in which it is located.
- partof – optional – the larger complex the given installation is part of, if any. For proper grammar, it may be necessary to insert "the" before the name used here.
- location – the geographical location of the installation.
- image – optional – an image of the installation. The image must be given in the form [[Tập tin:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
- caption – optional – the text to be placed below the image.
- map_type – optional – the base map to be used for the location map, e.g., "Scotland"; see {{Bản đồ định vị}} for more details.
- map_relief – optional – set to any non-blank value to use a relief map (if available).
- coordinates – optional – latitude and longitude for placing the marker on the location map. Use {{Tọa độ}}; see the Coord template documentation for details.
- gridref – optional - map grid reference.
- map_size – optional – width of the location map in pixels (px), e.g., "150"; defaults to "220".
- map_alt – optional – alt text for location map; see Wikipedia:Alternative text for images.
- map_caption – optional – caption displayed below the location map; defaults to "Shown within {{{map_type}}}", e.g., "Shown within Scotland".
- type – optional – the general type of installation ("Castle", "Fortress", "Bunker", "Military base", "Wall", "Defensive line", etc.).
- code – optional – the location or facility code, such as the ILC or ILK code.
- built – optional – the date when the installation was built, usually given in years. Use {{start date}} if 1583 or later.
- builder – optional – the person or group responsible for building the installation.
- materials – optional – the materials used to construct the installation.
- height – optional – where relevant (e.g. for towers), the height of the installation.
- length – optional – where relevant (e.g. for fences and DMZs), the length of the installation.
- floor_area – optional – where relevant (e.g. for buildings), the interior floor area of the installation.
- site_area – optional – where relevant (e.g. for compounds), the land area of the installation.
- used – optional – the period during which the installation was in active military use, usually given in years.
- demolished – optional – the date when the installation was demolished, if applicable.
- condition – optional – the current condition of the installation.
- ownership – optional – the current owner of the installation, if relevant.
- open_to_public – optional – whether the installation is currently open to the general public, if relevant; indicated by "yes" or "no".
- controlledby – optional – the country or other power controlling the installation. Multiple powers may be indicated together with the corresponding dates.
- garrison – optional – the military forces garrisoning the installation. Specific units may be indicated if known; general numbers should be given otherwise.
- current_commander – optional – for installations currently in military use, the current commanding officer.
- past_commanders – optional – any notable individuals that commanded the forces using this installation; the choice of which commanders qualify as notable is left to the editors of a particular article.
- occupants – optional – any notable occupants of the installation other than its commanders; as above, the choice of which occupants qualify as notable is left to the article editors.
- battles – optional – any notable battles (usually sieges) that took place in or are closely associated with the installation; as above, the choice of which battles qualify as notable is left to the article editors.
- events – optional – any notable non-battle events that took place in or are closely associated with the installation; as above, the choice of which events qualify as notable is left to the article editors.
- image2 – optional – a second image of the installation. The image must be given in the form [[Tập tin:Example.jpg|300px]]; in particular, the thumb attribute must not be selected.
- caption2 – optional – the text to be placed below the second image.
Microformat
The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}}.
hCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes; nor collapse nested elements which use them.
When giving coordinates, please don't be overly precise.