Bản mẫu:Infobox Australian road

Tài liệu bản mẫu[xem] [sửa] [lịch sử] [làm mới]

Cách sử dụng

{{Infobox Australian road}} is the standard infobox used in Australian articles. Australian articles using {{Infobox road}} should be converted to use this infobox as it contains additional functionality, including that of {{Infobox street}} and {{Infobox road junction}}. Code exists for implementation of {{Infobox road small}} functionality if that is deemed to be necessary. See this discussion for more information.

To use this template

1. Copy the relevant blank template from the Blank infobox template page into the beginning of your document, remembering to put the code at the very top of the article and the first word of the article on the very next line. For road junctions, use the reduced parameter set at Template:Infobox Australian road/Blank#Road junctions.
2. Enter values for the parameters as outlined in the table below. Fields left blank will automatically be hidden.
3. Preview.
4. Save the page with an appropriate edit summary.

Examples

• Examples of this template can found on the examples page.

Parameters

All parameters used by this template are optional, except for |type=. Some parameters require others to be completed in order to display data correctly. The following are available:

Parameter	Description	Source/notes	Values
type	type of road	Required parameter. Sets up the template for a specific type of road or road junction.	"highway", "road", "rural road", "street", "expressway", "freeway", "motorway", "parkway", "track" or "junction"
urban		If the road is wholly contained within an urban area, set |urban=yes.	"yes" or empty
jtype	type of junction	Type of road junction. See Thể loại:Road junction types for examples.	wikitext (can contain links)
status  or uc_former	road status	Status of the road for use in limited circumstances. Only use when the road is under construction, proposed or has been closed.	Under construction: "uc" or "under construction" Proposed: "proposed" Closed: "closed"
road_name	name of road	Primary name used for road	plain text, do not wikilink
road_name2	alternative name	Alternative name(s) for road	plain text, do not wikilink. When there is more than one name, separate them with a solidus ( / ). If there are more than two names, use {{Plainlist}}
city	location of the road	Place where the road is located. This should be as detailed as is necessary. For road junctions, this will typically be a suburb.	wikitext (can contain links)
state	state where the road is located	Use the 2 or 3 digit state code corresponding to the location used for direction_a and end_a. It will automatically be converted to the full state name and wikilinked. If the road passes through more than one state, use state2 for the "other end" of the road.	"qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt" or "jbt".
state2		If the road passes through only one state, this parameter will not be used. When it is used, use the 2 or 3 digit state code corresponding to the location used for direction_b and end_b. It will automatically be converted to the full state name and wikilinked.
route_image	route shield/box	See here for a list of shields	image filename without "File:"
route_image2-8
photo	generic image of the road
photosize	width of photo	This is an optional parameter, generally used for images with portrait orientation. If not specified, image width defaults to 270px	numeric value, should not be greater than 300
caption	image caption	a caption for the image	wikitext (can contain links)
photo_alt	alt text	for the image
location	location map image	a map showing the location of the road. See this example. See here for a list of map images. If an image is not available, the locator map function may be used to provide the reader with an indication of the road's general location.	image filename without "File:"
loc_caption	location map caption	a caption for the location map	wikitext (can contain links)
location_alt	alt text	for the location map
alternative_location_map	locator map	Forces the locator map to use an alternative, rather than the state map, regardless of the contents of state.	Name of the alternative map
force_national_map		Forces the locator map to use the Australian, rather than the state map, regardless of the contents of state.	"yes" or leave blank, plain text, do not link
use_lga_map		Forces the locator map to use the lga map. For this to work, both state and lga must be set, with only one value in each.
relief		forces the locator map to use the relief version of the map. For an example of the relief map used in an infobox, see Top End.
coordinates	road coordinates	For coordinates, use {{coord}} with display=inline,title. Please do not be overly precise. If the locator map function is being used, this may be omitted, as the template generates the {{coord}} string from the locator map parameters, in which case this parameter is overridden.	Example: {{Coord|32|45|41.3|S|151|44|38.6|E|type:landmark_region:AU-NSW|display=inline,title}}
latd_a latm_a lats_a	end_a latitude	coordinates field	degrees minutes seconds
longd_a longm_a longs_a	end_a longitude
pushpin_label_position_a	end_a label position	position of the map label for end_a relative to the pushpin	left, right, top, bottom default: left
latd_b latm_b lats_b	end_b latitude	coordinates field	degrees minutes seconds
longd_b longm_b longs_b	end_b longitude
pushpin_label_position_b	end_b label position	position of the map label for end_b relative to the pushpin	left, right, top, bottom default: left
pushpin_map_caption	caption	a caption for the locator map	optional, wikitext (can contain links)
map_alt	alt text	for the locator map	wikitext (can contain links)
length	road length	length of the road in km	unformatted numeric value, will be formatted if length >= 1000.
length_rnd	rounding	Primarily for short roads such as Mouat Street.	single integer numeric value
length_ref	length reference	reference for the length of the road	properly formatted reference, preferably use {{cite web}}, {{cite news}} or other citation template
height	road junction height	height of the road junction in metres	unformatted numeric value, will be formatted if length >= 1000.
height_rnd	rounding		single integer numeric value
height_ref	height reference	reference for the height of the road junction	properly formatted reference, preferably use {{cite web}}, {{cite news}} or other citation template
spans	number of spans	number of bridge spans at the road junction	number
direction_a	road direction	direction of one end of the road. For split roads (see further down), instead use direction_a1, direction_a2 and direction_a3	plain text, "North", "South", "East", "West" or, when the direction is not one of these, use an abbreviated version, "NE", "SSW" etc. See Cardinal direction for advice.
direction_b		direction of the other end of the road. For split roads (see further down), instead use direction_b1, direction_b2 and direction_b3
end_a	road end	location of the end of the road. For split roads, instead use end_a1, end_a2 and end_a3	route shield, wikitext (can contain links)
end_b		location of the other end of the road. For split roads, instead use end_b1, end_b2 and end_b3
est	date opened	date or year that the road was opened	plain text
closed	date closed	date or year that the road was closed
gazetted	gazetted dat	Date the road was gazetted	date
gazetted_ref	gazettal reference	Reference for the road's gazettal	properly formatted reference, preferably use {{cite web}}, {{cite news}} or other citation template
built_by	construction details	Name of the company or authority that built the road	wikitext (can contain links)
maintained	maintenance authority	Name of the authority that maintains the road
history	route history	brief, significant notes about the road's history that should be expanded upon in the prose, and not be a replacement for it.
roads	roads at the junction	List of roads at the road junction. Use {{Plainlist}}
route	routes	route allocation	route shield, wikitext (can contain links)
former	former route information	Information about former route designation, etc.
tourist	tourist routes	a list of the tourist routes that follow the road
ring	ring road	The name of the locality that the ring road encircles. If this parameter is defined, it will override tloop</tloop>. When this parameter is used, direction_a and direction_b should not be used.	wikitext (can contain links)
tloop	tourist loop	The name of the locality that the tourist rad encircles. If ring is defined, it will override this parameter. When this parameter is used, direction_a and direction_b should not be used.
split	split road	If the road is split into named sections, set this to a non-null value. When set, it enables parameters listed further down this list used for the individual sections. up to 3 sections may be specified	"yes" or leave blank, plain text, do not link
exits	route	list of major exits/interchanges. For split roads, instead use exits1, exits2 and exits3 Note: Do not include a note linking to the full list further down the article. Per the Manual of Style for Infoboxes, this is not the purpose of the infobox – the table of contents provides that function.	route shield, wikitext (can contain links)
section1-3	section headings	For split roads with named sections, use section1, section2 and section3 to specify the names for each of up to 3 sections.	wikitext (can contain links)
region	region(s)	region(s) through which the road passes	route shield, wikitext (can contain links)
lga	lga(s)	List of LGA(s) through which the road passes. For multiple LGAs, use {{Plainlist}}	wikitext (can contain links)
through	suburbs/settlements	List of suburbs and other settlements through which the road passes. For multiple locations, use {{Plainlist}}
show_links	show highway links?	causes "Highway system" links to be shown at the bottom of the infobox. Is turned on by default when type = "highway", "expressway", "freeway", "motorway", or "parkway", and is usually not used for the other road types.	"yes" or "no" or leave blank (for default behaviour), plain text, do not link
show_links2	show additional highway link	causes an additional "Highway system" link to be shown for the specified state or territory, in addition to the links automatically determined from the state and state2 parameters. Will have no effect unless the highway links are already shown, either by default or with |show_links=yes	"qld", "nsw", "act", "vic", "tas", "sa", "wa", or "nt".
restrictions	general restrictions	brief, significant notes about any restrictions on the road, such as regular seasonal closures or permit requirements needed for access. Content here should be expanded upon in the prose, and not be a replacement for it.	wikitext (can contain links)
permit	permits required?	If permits are required, include number. Leave blank if not required. Only visible when type=track	plain text
fuel	fuel availability	Brief description of fuel availability on the road, only visible when |type=track	wikitext (can contain links)
facilities	facilities available	Brief description of facilities on the road, only visible when |type=track

TemplateData

An infobox template for Australian road articles. Tham số bản mẫu[Quản lý Dữ liệu bản mẫu] Tham số Miêu tả Kiểu Trạng thái type of road type Sets up the template for a specific type of road or road junction. Allowed values are "highway", "road", "rural road", "street", "expressway", "freeway", "motorway", "parkway", "track" or "junction" Chuỗi dài bắt buộc in urban area? urban If the road is wholly contained within an urban area, set to "yes", otherwise leave blank Không rõ tùy chọn type of junction jtype Type of road junction Không rõ tùy chọn road status status uc_former Only use when the road is under construction, proposed or has been closed. Allowed values: "uc" or "under construction" or "proposed" or "closed" Chuỗi dài tùy chọn name of road road_name name Primary name used for road (plain text, do not wikilink) Chuỗi dài khuyên dùng alternative name road_name2 Alternative name(s) for road. plain text, do not wikilink. When there is more than one name, separate them with a solidus ( / ). If there are more than two names, use {{Plainlist}} Không rõ tùy chọn location of the road city Place where the road is located. This should be as detailed as is necessary. For road junctions, this will typically be a suburb. Không rõ tùy chọn state where the road is located state Use the 2 or 3 digit state code corresponding to the location used for direction_a and end_a. If the road passes through more than one state, use the state2 parameter for the "other end" of the road. Allowed values: "qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt" or "jbt". Chuỗi dài khuyên dùng state (other end of road) state2 If the road passes through more than one state, use the 2 or 3 digit state code corresponding to the location used for direction_b and end_b. Allowed values: "qld", "nsw", "act", "vic", "tas", "sa", "wa", "nt" or "jbt". Chuỗi dài tùy chọn route shield/box -- normally not required route_image ONLY use for articles about a specific route, NOT for articles about named roads! Specify the image filename (without "File:") for the specific route's marker image Không rõ tùy chọn route_image2 route_image2 không có miêu tả Không rõ lỗi thời route_image3 route_image3 không có miêu tả Không rõ lỗi thời route_image4 route_image4 không có miêu tả Không rõ lỗi thời route_image5 route_image5 không có miêu tả Không rõ lỗi thời route_image6 route_image6 không có miêu tả Không rõ lỗi thời route_image7 route_image7 không có miêu tả Không rõ lỗi thời route_image8 route_image8 không có miêu tả Không rõ lỗi thời photo or road photo generic image of the road. Specify as image filename without "File:" Không rõ tùy chọn width of photo photosize Width of photo in pixels. Optional, generally used for images with portrait orientation. Specify a numeric value less than 300. Số tùy chọn photo caption caption a caption for the photo Không rõ tùy chọn alt text for photo photo_alt alt text for the photo. See [[MOS:ALT]] for guidance Không rõ tùy chọn alt text for image alt alt text for photo or location map image Không rõ lỗi thời location map image location a map showing the location of the road. Specify an image filename, without "File:" Không rõ tùy chọn location map caption loc_caption a caption for the location map, generally of the form "Map of (somewhere) with (road name) highlighted in (colour)" Không rõ tùy chọn alt text for location map location_alt alt text for the location map image. See [[MOS:ALT]] for guidance Không rõ tùy chọn alternative_location_map alternative_location_map (locator map parameter) Forces the locator map to use an alternative, rather than the state map, regardless of the contents of 'state' parameter. Không rõ tùy chọn force_national_map force_national_map (locator map parameter) Forces the locator map to use an alternative, rather than the state map, regardless of the contents of 'state' parameter. Không rõ tùy chọn use_lga_map use_lga_map (locator map parameter) Forces the locator map to use the lga map. For this to work, both 'state' and 'lga' parameters must be set, with only one value in each. Không rõ tùy chọn relief relief (locator map parameter) forces the locator map to use the relief version of the map. Không rõ tùy chọn end_a latitude (degrees) latd_a degrees component of the end_a latitude Không rõ tùy chọn end_a latitude (minutes) latm_a minutes component of the end_a latitude Không rõ tùy chọn end_a latitude (seconds) lats_a seconds component of the end_a latitude Không rõ tùy chọn end_a longitude (degrees) longd_a degrees component of the end_a longitude Không rõ tùy chọn end_a longitude (minutes) longm_a minutes component of the end_a longitude Không rõ tùy chọn end_a longitude (seconds) longs_a seconds component of the end_a longitude Không rõ tùy chọn end_a label position pushpin_label_position_a position of the map label for end_a relative to the pushpin. allowed values: "left", "right", "top", or "bottom" (defaults to left) Không rõ tùy chọn latd_b latd_b không có miêu tả Không rõ tùy chọn latm_b latm_b không có miêu tả Không rõ tùy chọn lats_b lats_b không có miêu tả Không rõ tùy chọn longd_b longd_b không có miêu tả Không rõ tùy chọn longm_b longm_b không có miêu tả Không rõ tùy chọn longs_b longs_b không có miêu tả Không rõ tùy chọn end_b label position pushpin_label_position_b position of the map label for end_b relative to the pushpin. allowed values: "left", "right", "top", or "bottom" (defaults to left) Không rõ tùy chọn latitude latitude không có miêu tả Không rõ tùy chọn longitude longitude không có miêu tả Không rõ tùy chọn locator map caption pushpin_map_caption a caption for the locator map Không rõ tùy chọn alt text for locator map map_alt alt text for the locator map. See [[MOS:ALT]] for guidance Không rõ tùy chọn road coordinates coordinates For coordinates: either at the midpoint, or for both ends of the road. Use {{coord}} with display=inline,title. Please do not be overly precise. If the locator map function is being used, this may be omitted, as the template generates the {{coord}} string from the locator map parameters, in which case this parameter is overridden. Không rõ tùy chọn coordinates_display coordinates_display không có miêu tả Không rõ tùy chọn date opened est date or year that the road was opened Không rõ khuyên dùng date closed closed date or year that the road was closed Không rõ tùy chọn gazetted date gazetted Date that the road was gazetted Không rõ tùy chọn gazettal reference gazetted_ref Reference for the road's gazettal Không rõ tùy chọn construction details built_by Name of the company or authority that built the road Không rõ tùy chọn maintenance authority maintained Name of the authority that maintains the road Không rõ tùy chọn brief history history brief, significant notes about the road's history that should be expanded upon in the prose, and not be a replacement for it. Không rõ tùy chọn road length length Length of the road in km. Specify an unformatted numeric value Số tùy chọn length rounding length_rnd Primarily for short roads such as [[Mouat Street]]. Specify a single integer numeric value Số tùy chọn length reference length_ref reference for the length of the road. <ref> tags required; an existing reference can be reused Không rõ tùy chọn road junction height height height of the road junction in metres Không rõ tùy chọn height rounding height_rnd single integer numeric value Không rõ tùy chọn height reference height_ref reference for the height of the road junction. <ref> tags required; an existing reference can be reused Không rõ tùy chọn number of spans spans number of bridge spans at the road junction Số tùy chọn roads at the junction roads For a road junction, list of roads at the junction. Use {{Plainlist}} Không rõ tùy chọn route number(s) route route marker image (use {{AUshield}}) AND route number as text (can be a wikilink). Use {{Plainlist}} to specify multiple route allocations. Không rõ khuyên dùng former route information former Information about former route designation, etc. Không rõ tùy chọn tourist routes tourist a list of the tourist routes that follow the road Không rõ tùy chọn ring road ring The name of the locality that the ring road encircles. When this parameter is used, direction_a and direction_b should not be used. Không rõ tùy chọn tourist loop tloop The name of the locality that the tourist road encircles. When this parameter is used, direction_a and direction_b should not be used. Không rõ tùy chọn direction of one end of road. direction_a direction of one end of the road. Specify a plain text direction, such as "North", "South", "Northwest", etc. Không rõ khuyên dùng end of road end_a intersecting road and location of the end of the road. Không rõ khuyên dùng major exits/intersections exits list of major exits/interchanges. Use {{Plainlist}} Không rõ khuyên dùng direction of other end of road direction_b direction of the other end of the road. Specify a plain text direction, such as "North", "South", "Northwest", etc. Không rõ khuyên dùng other end of road end_b intersecting road and location of the other end of the road. Không rõ khuyên dùng section1 section1 không có miêu tả Không rõ tùy chọn split split không có miêu tả Không rõ tùy chọn direction_a1 direction_a1 không có miêu tả Không rõ tùy chọn end_a1 end_a1 không có miêu tả Không rõ tùy chọn exits1 exits1 không có miêu tả Không rõ tùy chọn direction_b1 direction_b1 không có miêu tả Không rõ tùy chọn end_b1 end_b1 không có miêu tả Không rõ tùy chọn direction direction không có miêu tả Không rõ tùy chọn section2 section2 không có miêu tả Không rõ tùy chọn direction_a2 direction_a2 không có miêu tả Không rõ tùy chọn end_a2 end_a2 không có miêu tả Không rõ tùy chọn exits2 exits2 không có miêu tả Không rõ tùy chọn direction_b2 direction_b2 không có miêu tả Không rõ tùy chọn end_b2 end_b2 không có miêu tả Không rõ tùy chọn section3 section3 không có miêu tả Không rõ tùy chọn direction_a3 direction_a3 không có miêu tả Không rõ tùy chọn end_a3 end_a3 không có miêu tả Không rõ tùy chọn exits3 exits3 không có miêu tả Không rõ tùy chọn direction_b3 direction_b3 không có miêu tả Không rõ tùy chọn end_b3 end_b3 không có miêu tả Không rõ tùy chọn LGA(s) lga LGA(s) through which the road passes. For multiple LGAs, use {{Plainlist}} Không rõ tùy chọn region(s) region region(s) through which the road passes Không rõ tùy chọn suburbs/settlements through List of suburbs and other settlements through which the road passes. Không rõ tùy chọn general restrictions restrictions brief, significant notes about any restrictions on the road, such as regular seasonal closures or permit requirements needed for access. Content here should be expanded upon in the prose, and not be a replacement for it. Không rõ tùy chọn permits required permit If permits are required, include number. Leave blank if not required. Only visible when 'type' parameter is specified as 'track' Không rõ tùy chọn fuel availability fuel Brief description of fuel availability on the road. Only visible when 'type' parameter is specified as 'track' Không rõ tùy chọn facilities available facilities Brief description of facilities on the road. Only visible when 'type' parameter is specified as 'track' Không rõ tùy chọn show highway links? show_links causes "Highway system" links to be shown at the bottom of the infobox. Is turned on by default when type = "highway", "expressway", "freeway", "motorway", or "parkway", and is usually not used for the other road types. Specify "yes" or "no" or leave blank (for default behaviour) Không rõ tùy chọn show additional highway link show_links2 causes an additional "Highway system" link to be shown for the specified state or territory, in addition to the links automatically determined from the 'state' and 'state2' parameters. Will have no effect unless the highway links are already shown, either by default or by setting 'show_links' parameter to 'yes'. Allowed values: "qld", "nsw", "act", "vic", "tas", "sa", "wa", or "nt" Không rõ tùy chọn

Notes

Type

The infobox type affects the colour of the top bar of the infobox.

Colour	|type=
Snow Flurry (greenish)	highway
Light Yellow	road, rural road
Antique White	street
Lavender	expressway, freeway, motorway, parkway
Cape Honey (yellowish)	track
Ghost White	junction
Mauve	Undefined
	|status=, |uc_former=
Grandis	under construction, uc, proposed
Dark Grey	closed

"Ref" fields

Any references should be placed within the respective "_ref" parameter's field and not within the field reserved solely for a numeric value. For example, place the reference used for the length of the road in the {{{length_ref}}} and not in the {{{length}}} parameter. Otherwise, an error may result.

Unformatted numbers and expression errors

Certain parameters require numeric values to be entered in an unformatted/raw fashion—i.e. 1000.0 NOT 1,000.0. If an expression error is present, simply remove any commas or spaces from the number.

Deprecated parameter tracking

Articles that include deprecated parameters are automatically added to Thể loại:Australian road articles using deprecated parameters.

Subpages

• Infobox Australian road
• Infobox Australian road/Examples
• Infobox Australian road/doc

Microformat

The HTML mark up produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue article across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.

If the place or venue has an "established", "founded", "opened" or similar date, use {{Start date}}.

hCard uses HTML classes including:

• adr
• agent
• category
• county-name
• extended-address
• fn
• label
• locality
• nickname
• note
• org
• region
• street-address
• vcard

Geo is produced by calling {{coord}}, and uses HTML classes:

• geo
• latitude
• longitude

Please do not rename or remove these classes; nor collapse nested elements which use them.

When giving coordinates, please don't be overly precise.

Tài liệu bên trên được truyền tải từ Bản mẫu:Infobox Australian road/doc. (sửa | lịch sử)
Biên tập viên sửa đổi có thể thử nghiệm trong các trang chỗ thử (tạo | sao) và trường hợp kiểm thử (tạo) của bản mẫu này.
Xin hãy bổ sung các thể loại vào trang con /doc. Các trang con của bản mẫu này.